LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 593 (Lighting System) >> Front Fog Light Bulb Removal/Installation

Front Fog Light Bulb Removal/Installation

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the front fog light. (See FRONT FOG LIGHT REMOVAL/INSTALLATION .)
  3. Disconnect the connector.
    Fig 1: Identifying Front Fog Light Bulb And Connector
    G05986188Courtesy of MAZDA MOTORS CORP.
  4. Remove the front fog light bulb by turning it in the direction of the arrow.
    CAUTION:
    • A halogen bulb generates extremely high heat when it is illuminated. If the surface of the bulb is soiled, excessive heat will build up and the life of the bulb will be shortened. When handling the bulb, hold the flange, not the glass.
  5. Install in the reverse order of removal.
Fig 2: Removing Front Fog Light Bulb
G05986189Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals