LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 593 (Lighting System) >> Door Switch Removal/Installation

Door Switch Removal/Installation

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the screw.
  3. Disconnect the connector and remove the door switch.
  4. Install in the reverse order of removal.
Fig 1: Identifying Door Switch And Connector
G05986254Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals