LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 588 (Basic System (HVAC)) >> Airflow Mode Main Link Removal/Installation

Airflow Mode Main Link Removal/Installation

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the A/C amplifier. (See A/C AMPLIFIER REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER] .) (See A/C AMPLIFIER REMOVAL/INSTALLATION [MANUAL AIR CONDITIONER] .)
  3. Remove the airflow mode link set.
  4. Remove the airflow mode main link as shown in the figure.
  5. Install in the reverse order of removal.
Fig 1: Identifying Airflow Mode Main Link
G05985421Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals