LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System >> Metering Oil Pump Driver Removal/Installation

Metering Oil Pump Driver Removal/Installation

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP] .)
  2. Disconnect the negative battery cable.
  3. Disconnect the metering oil pump driver connector.
  4. Remove the metering oil pump driver.
  5. Install in the reverse order of removal.
Fig 1: Metering Oil Pump Driver Screws With Torque Specifications
G05981161Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals