LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Tank Removal/Installation >> Fuel-Filler Pipe Removal Note

Fuel-Filler Pipe Removal Note

  1. Remove the rear ABS wheel-speed sensor. (See REAR ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION .)
  2. Remove the rear shock absorber lower bolt. (See REAR SHOCK ABSORBER AND COIL SPRING REMOVAL/INSTALLATION .)
  3. Loosen the rear crossmember installation nut (6 locations), and lower the rear crossmember. (See REAR CROSSMEMBER REMOVAL/INSTALLATION .)
  4. Remove the fuel-filler pipe.
scientia non olet · About LEMON Manuals