LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Auxiliary Port Valve (APV) Position Sensor Removal/Installation >> APV Position Sensor No. 2

APV Position Sensor No. 2

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP] )
  2. Disconnect the negative battery cable.
  3. Remove the exhaust manifold. (See EXHAUST SYSTEM REMOVAL/INSTALLATION )
  4. Disconnect the APV position sensor No. 2 connector.
  5. Remove the APV position sensor No. 2.
  6. Install in the reverse order of removal.
Fig 1: APV Position Sensor No. 2 With Mounting Bolt With Torque Specifications
G05981127Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals