LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Exhaust System Removal/Installation >> Main Silencer Installation Note

Main Silencer Installation Note

CAUTION:
  • If the main silencer and middle pipe are reused after being separated once, exhaust gas leakage will occur. When replacing the main silencer or middle pipe, always replace the main silencer and middle pipe at the same time.
  1. Install the main silencer so that the stopper is at the position shown in the illustration.
Fig 1: Identifying Stopper Position For Installing Main Silencer
G05981030Courtesy of MAZDA MOTORS CORP.