LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Brakes >> Traction Control >> General Procedures [Brake System] >> General Procedures (Brake) >> DSC Related Part Sensor Initialization Procedure

DSC Related Part Sensor Initialization Procedure

WARNING:
  • If the initialization procedure is not completed, the DSC will not operate properly and it might cause an unexpected accident. Therefore, when replacing or removing the following parts, make sure to perform the initialization procedure to insure proper DSC operation.
  1. When replacing or removing the following parts, perform the initialization procedure. (Refer to COMBINED SENSOR INITIALIZATION PROCEDURE .) (Refer to STEERING ANGLE SENSOR INITIALIZATION PROCEDURE .)
    • DSC HU/CM
    • Combined sensor
    • Steering angle sensor
scientia non olet · About LEMON Manuals