LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System >> DSC HU/Cm Removal/Installation >> DSC HU/CM Connector Removal Note

DSC HU/CM Connector Removal Note

  1. Pull the lock lever up in the direction of the arrow shown in figure.
  2. Pull the connector toward the vehicle rear and remove it.
Fig 1: View Of Pulling Lock Lever Up
G05985203Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals