LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Outer Mirror Inspection

Power Outer Mirror Inspection

  1. Apply battery positive voltage and connect the ground to the corresponding power outer mirror terminals, and then inspect the operation of the power outer mirror.
    • If not as specified, replace the power outer mirror.
    POWER OUTER MIRROR SPECIFICATION

    Operation Terminal
    B+ GND
    Up B D
    Down D B
    Left F D
    Right D F
    Fig 1: Identifying Power Outer Mirror Connector
    G05985867Courtesy of MAZDA MOTORS CORP.
  2. Inspect for continuity between the power outer mirror heater terminals.
Fig 2: Power Outer Mirror Heater Continuity Chart
G05985868Courtesy of MAZDA MOTORS CORP.
Fig 3: Identifying Power Outer Mirror Connector
G05985869Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals