Power Window SUBSWITCH Inspection: Rear

Disconnect the negative battery cable.
Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION .)
Verify that the continuity is as indicated in the table using a tester.
- If not as indicated in the table, replace the power window subswitch. (See POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION .)
Fig 1: Terminals Continuity Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Inspecting Rear Power Window Subswitch Terminals Continuity
Courtesy of MAZDA MOTORS CORP.