LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 s Touring Plus >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Accessory Socket Removal/Installation >> Front

Accessory Socket Removal/Installation: Front

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION .)
    2. Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION .)
    3. Shift knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
    4. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION .)
    5. Center panel lower (See CENTER PANEL LOWER REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.

    With keyless entry system 

    Fig 1: Center Lower Panel, Accessory Socket (Front) And Cap (With Keyless Entry System)
    G06201194Courtesy of MAZDA MOTORS CORP.

    With advanced keyless entry and push button start system 

    PARTS DESCRIPTION CHART

    1 Accessory socket (Front)
    (See ACCESSORY SOCKET REMOVAL NOTE .)
    2 Cap
    (See CAP REMOVAL NOTE .)
  4. Install in the reverse order of removal.
Fig 2: Center Lower Panel, Accessory Socket (Front) And Cap (With Advanced Keyless Entry And Push Button Start System)
G06201194Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals