Clutch Pedal Position (CPP) Switch Inspection
- Verity that the CPP switch is installed property.
- Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
- Disconnect CPP switch connector. (See CLUTCH PEDAL REMOVAL/INSTALLATION [G66M-R] .)
- Inspect for continuity between CPP switch terminals A and B.
- If not as specified, replace the CPP switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION [G66M-R] .)
CPP SWITCH SPECIFICATION
| Measured condition | Clutch pedal position | Continuity |
|---|---|---|
| Rod pushed | Clutch pedal released | Continuity detected |
| Except above | Clutch pedal depressed | No continuity |