LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 6 i Grand Touring >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System >> DSC HU/Cm Removal/Installation >> Brake Pipe Removal Note

Brake Pipe Removal Note

  1. Place an alignment mark on the brake pipe and DSC HU/CM.
  2. Affix protective tape to the connector to prevent brake fluid from entering.
  3. Remove the brake pipe.
  4. Adhere protective tape to the installation area of the DSC HU/CM brake pipe to prevent foreign material penetration.
Fig 1: Alignment Mark On Brake Pipe And DSC HU/CM
G07621173Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals