LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 3 i Touring, 2.0 F, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle [Shift Mechanism] >> Key Interlock System Inspection >> NOT P Position Switch Inspection

NOT P Position Switch Inspection

  1. Perform the following procedures.
    1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [LF, L5] ).
    2. Disconnect the negative battery cable.
    3. Remove the console. (See CONSOLE REMOVAL/INSTALLATION ).
    4. Disconnect the selector lever component connector.
      Fig 1: Identifying Selector Lever Component Connector
      G06732789Courtesy of MAZDA MOTORS CORP.
  2. Inspect the continuity between the selector lever component terminals G and K.
    NOT P POSITION SWITCH SPECIFICATION

    Test condition Continuity
    P position No continuity
    Except P position Continuity
    Fig 2: Identifying Selector Lever Component Terminals
    G06732790Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals