LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 3 i Touring, 2.0 F, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 565 (Entertainment System) >> Accessory Socket Inspection >> Front

Accessory Socket Inspection: Front

WARNING: This page is about a different car, the 2010 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the upper panel. (See UPPER PANEL REMOVAL/INSTALLATION .)
  3. Remove the shift knob. (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
  4. Remove the selector lever knob. (ATX) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
  5. Remove the shift panel (See SHIFT PANEL REMOVAL/INSTALLATION .)
  6. Remove the accessory socket (front) (See ACCESSORY SOCKET REMOVAL/INSTALLATION .)
  7. Connect a tester as shown in the illustration and verify that there is continuity.
    • If the continuity cannot be verified, replace the accessory socket (Front).
      Fig 1: Checking Accessory Socket (Front)
      G05986349Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals