Total Toe-in Adjustment
WARNING: This page is about a different car, the 2010 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the installation nut of the adjusting cam bolt.
- Rotate the adjusting cam bolt in either direction to adjust the camber.TOE-IN SPECIFICATION
- Left wheel Right wheel Toe-out direction Clockwise Counterclockwise Toe-in direction Counterclockwise Clockwise - Tighten the nut.
Tightening torque 80-100 N.m {8.2-10 kgf.m, 60-73 ft.lbf}