LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 3 i SV, 2.0 F >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [LF, L5] >> Pcm Configuration >> Wheel And Tire Size change

Wheel And Tire Size change

NOTE:
  • Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the PCM CONFIGURATION.
  1. Connect the M-MDS to DLC-2.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select the "Module Programming".
  3. Then, select items from the screen menu in the following order.
    1. Select "Programmable Parameters".
    2. Select "Tire Size" or "Tire Size/Axle Ratio".
      Fig 1: Identifying DLC-2
      G07868513Courtesy of MAZDA MOTORS CORP.
  4. Select an item name, and then select option.
    CAUTION:
    • The same parameter should be set in Tire dimension, Tire Circumference and Tire Size.

    Items of "Tire Size" 

    • Tire dimension (195/70R15, 195/65R15, 205/55R16 205/50R17, 225/40R18)
    • Tire Circumference (195/70R15, 195/65R15, 205/55R16 205/50R17, 225/40R18)

    Items of "Tire Size/Axle Ratio" 

    • Tire Size (195/70R15, 195/65R15, 205/55R16 205/50R17, 225/40R18)
scientia non olet · About LEMON Manuals