LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Front Shock Absorber And Coil Spring Disassembly/Assembly >> Bearing Installation Note

Bearing Installation Note

  1. Install the bearing by hooking the upper end of the dust boot to the bearing lip.
    Fig 1: Installing Bearing By Hooking Upper End Of Dust Boot To Bearing Lip
    G04955465Courtesy of MAZDA MOTORS CORP.
  2. Align the projection A on the lower part of the shock absorber with the bearing projection B.
    Fig 2: Aligning Projection A On Lower Part Of Shock Absorber With Bearing Projection B
    G04955466Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals