LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Buckle Switch Inspection >> Driver Side

Driver Side

  1. Switch the ignition to off.
  2. Disconnect the negative battery cable.
  3. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION ).
  4. Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION ).
  5. Inspect for continuity between the buckle switch terminals using a tester.
    • If not as indicated in the table, replace the driver side front buckle.
      Fig 1: Inspecting Continuity Between Buckle Switch Terminals Using Tester
      G07626715Courtesy of MAZDA MOTORS CORP.
      Fig 2: Identifying Power Seat And Without Power Seat Switch
      G06731718Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals