LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Adjuster Anchor Removal/Installation

Adjuster Anchor Removal/Installation

WARNING:
  • The side air bag sensor is attached to the lower part of the B-pillar. When working around the B-pillar, disconnect the negative battery cable or work carefully, avoiding excessive impact to the lower part of the B-pillar.
  1. Remove the following parts:
    1. Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION ).
    2. Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION ).
    3. B-pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION ).
    4. Front seat belt upper anchor installation bolt (See FRONT SEAT BELT REMOVAL/INSTALLATION [STANDARD DEPLOYMENT CONTROL SYSTEM] ). (See FRONT SEAT BELT REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM] ).
    5. B-pillar upper trim (See B-PILLAR UPPER TRIM REMOVAL/INSTALLATION ).
  2. Remove bolts.
  3. Remove the adjuster anchor.
  4. Install in the reverse order of removal.
    Fig 1: Removing Adjuster Anchor With Torque Specifications
    G06731702Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals