LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System [LF, L5]) >> Crankshaft Position (CKP) Sensor Removal/Installation >> Removal >> Notes

Crankshaft Position (CKP) Sensor Removal/Installation: Removal: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [LF, L5] ).
  2. Disconnect the negative battery cable.
  3. Perform the following procedure for easier access.
    1. Remove the under cover.
    2. Remove the splash shield.
  4. Disconnect the CKP sensor connector.
  5. Remove the CKP sensor.
    Fig 1: Identifying CKP Sensor And Bolts
    G07868536Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals