LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Automatic Transaxle [Shift Mechanism]) >> Automatic Transaxle Shift Mechanism Removal/Installation >> Bulb Removal/Installation

Bulb Removal/Installation

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [LF, L5] ).
  2. Disconnect the negative battery cable.
  3. Remove the upper panel. (See UPPER PANEL REMOVAL/INSTALLATION ).
  4. Remove the knob. (See SELECTOR LEVER REMOVAL/INSTALLATION ).
  5. Remove the shift panel and indicator panel as a single unit.
    1. Release the hooks securing the shift panel and console, and then release the hooks securing the shift panel and ashtray panel. (See SHIFT PANEL REMOVAL/INSTALLATION ).
    2. Lift up the shift panel and indicator panel and disconnect the bulb socket from the indicator panel.
      Fig 1: Disconnecting Bulb Socket From Indicator Panel
      G06732763Courtesy of MAZDA MOTORS CORP.
    3. Remove the shift panel and indicator pane from the selector lever as a single unit.
      Fig 2: Identifying Shift Panel And Indicator Pane
      G06732754Courtesy of MAZDA MOTORS CORP.
  6. Remove the bulb from the bulb socket.
  7. Install in the reverse order of removal.
    Fig 3: Removing Bulb From Bulb Socket
    G06732778Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals