LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Starting System [LF, L5]) >> Starter Interlock Switch Inspection

Starter Interlock Switch Inspection

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Do not reuse the starter interlock switch if it is removed from the vehicle even once. Replace with a new starter interlock switch when installing.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [LF, L5] ).
  2. Disconnect the starter interlock switch connector.
  3. Verify that the continuity is as indicated in the table using a tester.
    Fig 1: Starter Interlock Switch Terminals Continuity Chart
    G06733974Courtesy of MAZDA MOTORS CORP.
    • If the continuity is not as indicated in the table, replace the starter interlock switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION ).
      Fig 2: Identifying Starter Interlock Switch Connector Terminals
      G06151032Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals