LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System [L3 With TC] >> Exhaust System Removal/Installation >> Presilencer Installation Note

Presilencer Installation Note

  1. Spray carbon remover (TB6601 or equivalent) on the flared section of the exhaust pipe.
  2. Remove the carbon adhering to the flared section shown in the figure using a nylon brush or sandpaper (No. 400 or equivalent).
    Fig 1: Identifying Flared Section Of Exhaust Pipe
    G06732703Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals