LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Rear Abs Wheel-Speed Sensor Removal/Installation >> ABS Hole Cover Installation Note

ABS Hole Cover Installation Note

  1. Install the ABS hole cover into the body so that the arrow in the figure on it is facing toward the outer side of the vehicle.
    Fig 1: Installing ABS Hole Cover Into Body On Outer Side Of Vehicle
    G06733260Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals