IG-OFF Timer Function Inspection
DIAGNOSTIC PROCEDURE CHART
| STEP |
INSPECTION |
ACTION |
| 1 |
- Close all doors.
- Switch the ignition from the ON to the off.
- Operate the power window main switch within 43 seconds after turning the ignition switch to the LOCK position.
- Does the power window operate?
|
Yes |
Go to the next step. |
| No |
- Inspect the door switches and related wiring harness.
- If above parts are okay, replace the power window main switch, then go to the next step.
- If above parts are incorrect repair or replace malfunction part(s), then go to the next step.
|
| 2 |
- Open any door.
- Switch the ignition from the ON to the off.
- Operate the power window main switch within 43 seconds after turning the ignition switch to the LOCK position.
- Does the power window operate?
|
Yes |
- Inspect the door switches and related wiring harness.
- If above parts are okay, replace the power window main switch, then go to the next step.
- If above parts are incorrect repair or replace malfunction part(s), then go to the next step.
|
| No |
|
| 3 |
- Close all doors.
- Switch the ignition from the ON to the off.
- Operate the power window main switch within 60 seconds after turning the ignition switch to the LOCK position.
- Does the power window operate?
|
Yes |
- Replace the power window main switch (power window control unit is malfunctioning.)
|
| No |
- IG-OFF timer function operation is normal.
- Perform the auto reverse pinch protection function inspection.
|