LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Window Motor Inspection >> Front Passenger Side

Front Passenger Side

  1. Disconnect the negative battery cable.
  2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION ).
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION ).
  4. Disconnect the power window motor connector.
  5. Apply battery positive voltage and connect the ground to power window motor terminals E and F, and then inspect the power window motor operation.
    • If the power window motor does not operate as indicated in the chart, replace the power window motor.
    Operation Terminal
    E F
    Open Ground B+
    Close B+ Ground
    Fig 1: Connecting Ground To Power Window Motor Terminals E And F (Front Passenger Side)
    G06731789Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals