LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> Body & Frame >> Glass/Windows/Mirrors >> Power Window SUBSWITCH Inspection >> Passenger's Side

Passenger's Side

  1. Disconnect the negative battery cable.
  2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION ).
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION ).
  4. Remove the power window subswitch. (See FRONT DOOR TRIM DISASSEMBLY/ASSEMBLY ).
  5. Verify that the continuity is as indicated in the table using a tester.
    • If not as indicated in the table, replace the power window subswitch.
      Fig 1: Power Window Subswitch Terminals Continuity Chart (Passenger's Side)
      G07875201Courtesy of MAZDA MOTORS CORP.
      Fig 2: Identifying Power Window Subswitch Connector Terminals (Passenger's Side)
      G06731792Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals