Advanced Keyless Entry And Push Button Start System
NOTE:
- Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the CUSTOMIZED FUNCTION SETTING PROCEDURE.
- Connect the M-MDS to the DLC-2.
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- Select "Module Programming".
- Then, select items from the screen menu in the following order.
- Select "Programmable Parameters".
- Select "RKE".
- Select the item name, and then select option.
| Mazda Modular Diagnostic System (M-MDS) display | Function | Initial setting | Setting content | Control unit |
|---|---|---|---|---|
| Advanced keyless function | Advanced keyless entry and push button start system function can be set to inoperable. | Enabled | Disabled/Enabled | Keyless control module |
| Advanced key battery low warning | Advanced key remaining battery level/battery dead warning can be set. | Enabled | Disabled/Enabled | Keyless control module |
| Auto Lock | Auto lock function can be set. | Disabled | Disabled/Enabled | Keyless control module |
| 2 stage door unlocking (with AKE) | The method for unlocking the doors using the request switch can be selected. | Enabled | Disabled/Enabled | Keyless control module |
| Auto relock timer (with AKE) | Auto re-lock operation timing can be changed. | 30 s | 30s/60s/90s | Keyless control module |
| Answer back buzzer volume | Volume adjustment of the answer back buzzer can be set. | 8 | Disabled/1-10 | Keyless control module |
| Warning buzzer volume | Volume adjustment of the warning buzzer can be set. | 8 | 1-10 | Keyless control module |