LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 3 Mazdaspeed, 2.3 4 >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment System >> Accessory Socket Inspection >> Front

Accessory Socket Inspection: Front

  1. Disconnect the negative battery cable.
  2. Remove the upper panel. (See UPPER PANEL REMOVAL/INSTALLATION ).
  3. Remove the shift knob. (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION ).
  4. Remove the selector lever knob. (ATX) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION ).
  5. Remove the shift panel (See SHIFT PANEL REMOVAL/INSTALLATION ).
  6. Remove the accessory socket (front) (See ACCESSORY SOCKET REMOVAL/INSTALLATION ).
  7. Connect a tester as shown in the figure and verify that there is continuity.
    • If the continuity cannot be verified, replace the accessory socket (Front).
      Fig 1: Checking Accessory Continuity Chart
      G05986349Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals