Standard (reference)
STANDARD (REFERENCE VALUE)
| Terminal | Signal name | Connected to | Measure d item | Measured terminal (measurement condition) | Standard | inspection item(s) |
|---|---|---|---|---|---|---|
| A | - | - | - | - | - | - |
| B | Ground | Ground point | Continuity | B-ground point | Continuity detected |
|
| C | RR wheel-speed (-) | RR ABS wheel-speed sensor | Continuity | C-RR ABS wheel-speed sensor connector terminal B | Continuity detected |
|
| D | - | - | - | - | - | - |
| E | RR wheel-speed (+) | RR ABS wheel-speed sensor | Continuity | E-RR ABS wheel-speed sensor connector terminal A | Continuity detected |
|
| F | - | - | - | - | - | - |
| G | - | - | - | - | - | - |
| H | CAN_H | DLC-2 (CAN_H) | This terminal is used for communication and cannot be used for malfunction determination during terminal voltage inspection. Perform a DTC inspection. | |||
| I | LF wheel-speed (+) | LF ABS wheel speed sensor | Continuity | I-LF ABS wheel-speed sensor connector terminal A | Continuity detected |
|
| J | - | - | - | - | - | - |
| K | LF wheel-speed (-) | ABS wheel-speed sensor (LF) | Continuity | K-LF ABS wheel-speed sensor connector terminal B | Continuity detected |
|
| L | CAN_L | DLC-2 (CAN_L) | This terminal is used for communication and cannot be used for malfunction determination during terminal voltage inspection. Perform a DTC inspection. | |||
| M | - | - | - | - | - | - |
| N | Power supply (System) | Ignition switch or IG1 relay | Voltage | Switch the ignition to ON | B+ |
|
| Switch the ignition to off | 1 V or less | |||||
| O | RF wheel-speed (-) | RF ABS wheel-speed sensor | Continuity | O-RF ABS wheel-speed sensor terminal B | Continuity detected |
|
| P | - | - | - | - | - | - |
| Q | RF wheel-speed (+) | RF ABS wheel-speed sensor | Continuity | Q-RF ABS wheel-speed sensor terminal A | Continuity detected |
|
| R | - | - | - | - | - | - |
| S | - | - | - | - | - | - |
| T | - | - | - | - | - | - |
| U | LR wheel-speed (+) | LR ABS wheel-speed sensor | Continuity | U-LR ABS wheel-speed sensor connector terminal A | Continuity detected |
|
| V | - | - | - | - | - | - |
| W | LR wheel-speed (-) | LR ABS wheel-speed sensor | Continuity | W-LR ABS wheel-speed sensor connector terminal B | Continuity detected |
|
| X | - | - | - | - | - | - |
| Y | Power supply (Solenoid operation, ABS motor operation) | Battery | Voltage | Under any condition | B+ |
|
| Z | - | - | - | - | - | - |