Suspension Technical Data: Notes

FRONT WHEEL ALIGNMENT (UNLOADED) TECHNICAL DATA

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full

Maximum steering angle [Tolerance ±3°]

Inner

40°12'

Outer

33°12'

Total toe-in

Tire
[Tolerance ±4 {0.2}]

(mm {in})

3 {0.1}

Rim inner

2±3{0.08±0.1}

(degree)

0°19'±0°24'

Caster angle⁽¹⁾(Reference value) [Tolerance ±1 °]

3°34'

3°36'

3°38'

3°41'

3°43'

Camber angle⁽¹⁾(Reference value) [Tolerance ±1°]

-0°44'

-0°45'

Steering axis inclination (Reference value)

13°26'

13°27'

13°28'

13°29'

*1: Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.

⁽¹⁾	Difference between left and right must not exceed 1°30'.

REAR WHEEL ALIGNMENT (UNLOADED) TECHNICAL DATA

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full

Total toe-in (Reference value)

Tire [Tolerance ±4 {0.2}]

(mm {in})

4 {0.2}

Rim inner

2±3{0.08±0.1}

(degree)

0°22'+0°24'

Camber angle⁽¹⁾(Reference value) [Tolerance ±1°]

-1°31'

Thrust angle (Reference value) [Tolerance ±0°48']

0°

*1: Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.

⁽¹⁾	Difference between left and right must not exceed 1°30'.

SUSPENSION TECHNICAL DATA

Item	Specification
Front lower arm ball joint rotational torque	3.2 N.m {33 kgf.cm, 28 in.lbf} max. Pull scale reading [32 N {3.3 kgf, 7.2 lbf} max.]
Front stabilizer control link ball joint rotational torque	0.8 N.m {82 kgf.cm, 7.1 in.lbf} max.