LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 2 Touring, 1.5 Z, Standard >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System MZR 1.5] >> DTC P2135:00 >> Notes

DTC P2135:00: Notes

DTC P2135:00 (MZR 1.5) DETECTION CONDITION AND POSSIBLE CAUSES

DTC P2135:00 TP sensor No. 1/No. 2 voltage correlation problem
DETECTION CONDITION 
  • The PCM compares the input voltage from TP sensor No. 1 with the input voltage from TP sensor No. 2 when the engine is running. If the difference is more than the specification, the PCM determines that there is a TP sensor No. 1/No. 2 voltage correlation problem.

    Diagnostic support note 

  • This is a continuous monitor (CCM).
  • The MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle.
  • FREEZE FRAME DATA (Mode 2)/Snapshot data is available.
  • The DTC is stored in the PCM memory.
POSSIBLE CAUSE 
  • Throttle body connector or terminals malfunction
  • PCM connector or terminals malfunction
  • TP sensor No. 1 malfunction
  • TP sensor No. 2 malfunction
  • PCM malfunction
scientia non olet · About LEMON Manuals