DTC P2109:00: Notes
DTC P2109:00 (MZR 1.5) DETECTION CONDITION AND POSSIBLE CAUSES
| DTC P2109:00 |
TP sensor minimum stop range/performance problem |
| DETECTION CONDITION |
- If the fully-open throttle position is 5.1 ° or lower
, or 15.9 ° or more
(even though the fully-open throttle position learning is finished), the PCM determines there is a malfunction.
Diagnostic support note
- This is a continuous monitor (CCM).
- The MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA (Mode 2)/Snapshot data is available.
- The DTC is stored in the PCM memory.
|
| POSSIBLE CAUSE |
- Improper operation of drive-by-wire control system
- Throttle valve actuator malfunction
- Throttle valve malfunction
- PCM malfunction
|