LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 2 Touring, 1.5 Z, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System MZR 1.5 >> Air Fuel Ratio (A/F) Sensor Inspection >> A/F Sensor Inspection

A/F Sensor Inspection

  1. Warm up the engine to normal operating temperature.
  2. Using the M-MDS, monitor the following:
    • Vehicle speed (PID: VSS)
    • Engine speed (PID: RPM)
    • A/F sensor current (PID: O2S11)
  3. Drive the vehicle and decelerate the engine speed by releasing the accelerator pedal fully when the engine speed is 3,000 rpm or more.
  4. Verify that the A/F sensor current (PID: O2S11) is 0.25 mA or more while decelerating as shown in the figure.
Fig 1: Monitoring Vehicle Speed, Engine Speed And A/F Sensor Current
G04859825Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals