Key Reminder Switch Removal/Installation

1. Disconnect the negative battery cable.
2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
3. Remove the coil antenna. (See COIL ANTENNA REMOVAL/INSTALLATION .)
4. Insert the key into the key cylinder and turn the ignition switch to the ACC position.
5. Disconnect the key reminder switch connector.
   Fig 1: Identifying Key Reminder Switch And Connector

   Courtesy of MAZDA MOTORS CORP.
6. Detach the key reminder switch tab.
7. Install the key reminder switch in the direction of the arrow shown in the figure.
8. Install in the reverse order of removal.

Fig 2: Removing Key Reminder Switch

Courtesy of MAZDA MOTORS CORP.