LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 2 Touring, 1.5 Z, Automatic >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Window Motor Inspection >> Rear Side

Rear Side

  1. Disconnect the negative battery cable.
  2. Remove the sail inner garnish. (See SAIL INNER GARNISH REMOVAL/INSTALLATION .)
  3. Remove the Rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION .)
  4. Disconnect the power window motor connector.
  5. Apply battery positive voltage and connect the ground to the power window motor terminals, and then inspect the power window motor operation.
    • If the power window motor does not operate as indicated in the table below, replace it.
    POWER WINDOW MOTOR OPERATION REFERENCE CHART

    Operation Terminal
    E F
    Open Ground B+
    Close B+ Ground
    Fig 1: Identifying Power Window Motor Circuit With Connector Terminals (Rear Side)
    G06941899Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals