Component Test - Ignition Switch
- Remove the ignition switch. See IGNITION SWITCH REMOVAL/INSTALLATION .
- Inspect for continuity between the ignition switch terminals using a self-powered test light or an ohmmeter.
COMPONENT TEST - IGNITION SWITCH
| Circuit to Test | Connect Self-Powered Test Light or Ohmmeter to Terminals | Move Key to These Positions | A Good Switch Will Indicate |
|---|---|---|---|
| Run/Start Power Circuit | 4 and 1 | Off/Lock | Open circuit |
| Accessory | Open circuit | ||
| Run | Closed circuit | ||
| Start | Closed circuit | ||
| Run/Ace Power Circuit | 4 and 6 | Off/Lock | Open circuit |
| Accessory | Closed circuit | ||
| Run | Closed circuit | ||
| Start | Open circuit | ||
| Start Power Circuit | 4 and 7 | Off/Lock | Open circuit |
| Accessory | Open circuit | ||
| Run | Open circuit | ||
| Start | Closed circuit |