LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> Tribute i Sport, FWD, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Transfer Case) >> 4X4 Control Module Removal/Installation

4X4 Control Module Removal/Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying 4X4 Control Module And Electrical Connector
G06358759Courtesy of MAZDA MOTORS CORP.
  1. Remove the floor console. See FLOOR CONSOLE REMOVAL/INSTALLATION .
  2. Disconnect the electrical connector.
  3. Lift upward on the module to release the fasteners from the shifter base. Remove the 4X4 control module.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals