Connect - Type II

NOTE:

Apply clean engine oil to the end of the tube and the quick connect coupling O-ring seals.

Rotate the lock tab and install the quick connect coupling onto the fitting.

Fig 1: Rotating Lock Tab And Quick Connect Coupling Onto Fitting
Courtesy of MAZDA MOTORS CORP.
NOTE:
- Make sure the fuel tube clicks into place when installing the tube. To make sure that the fuel tube is fully seated, pull on the tube.
Release the lock tab into the latched position.

Fig 2: Releasing Lock Tab Into Latched Position
Courtesy of MAZDA MOTORS CORP.
Connect the battery ground cable. See BATTERY DISCONNECT .