LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> Tribute Hybrid Touring, AWD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Exhaust >> General Procedures [Powertrain Mount/Exhaust System Alignment] >> Powertrain/Drivetrain Mount Neutralizing

Powertrain/Drivetrain Mount Neutralizing

  1. With the vehicle in NEUTRAL, position it on a hoist. See LIFTING .
  2. Loosen, but do not remove, the powertrain/drivetrain mount fasteners.
  3. Lower the vehicle.
  4. Start the vehicle and move it in forward 0.6-1.2 m (2-4 ft). Then move the vehicle in reverse the same distance.
    CAUTION:
    • Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.
  5. Raise and support the vehicle.
  6. Tighten the powertrain/drivetrain mount fasteners.
  7. Lower the vehicle.
  8. Test the system for normal operation.
scientia non olet · About LEMON Manuals