Engine Coolant Temperature Compensation Inspection
- Connect the M-MDS to the DLC-2.
- Select the following PIDs:
- ECT
- IAT
- RPM
- Verify that the engine is cold, then start the engine.
- Verify that the engine speed decreases as the engine warms up.
- If the engine speed does not decrease or decreases slowly, inspect the following:
- ECT sensor and related wiring harness
- Throttle body and related wiring harness
(See ENGINE COOLANT TEMPERATURE (ECT) SENSOR INSPECTION [13B-MSP] .)
- If the engine speed does not decrease or decreases slowly, inspect the following: