LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> RX-8 R3, 1.3 2 >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Condenser Removal/Installation >> Notes

Condenser Removal/Installation: Notes

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Rear seat (See REAR SEAT REMOVAL/INSTALLATION .)
    2. Console (See CONSOLE REMOVAL/INSTALLATION .)
    3. Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION .)
    4. Rear pillar trim (See REAR PILLAR TRIM REMOVAL/INSTALLATION .)
    5. Rear package side trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION .)
    6. Rear package center trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
    Fig 1: Condenser, Connector And Bolt With Torque Specifications
    G05986316Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals