Keyless Antenna Removal/Installation: Center

1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] )
2. Remove the console. (See CONSOLE REMOVAL/INSTALLATION )
3. Remove the side wall. (See SIDE WALL REMOVAL/INSTALLATION )
4. Remove the console panel. (See CONSOLE PANEL REMOVAL/INSTALLATION )
5. Remove the clips.
6. Disconnect the connector, then remove the keyless antenna.
7. Install in the reverse order of removal.

Fig 1: Identifying Fastener And Keyless Antenna

Courtesy of MAZDA MOTORS CORP.