LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> CX-7 s Touring, 2.3 3, FWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Front Buckle Removal/Installation

Front Buckle Removal/Installation

  1. Turn the ignition switch to the LOCK position.
  2. Disconnect the negative battery cable.
  3. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
  4. Detach the tab as shown below and remove the connector from the front seat connector.
    Fig 1: Identifying Front Seat Connector And Front Buckle Connector
    G04860851Courtesy of MAZDA MOTORS CORP.
  5. Remove in the order as indicated below.
  6. Install in the reverse order of removal.
    Fig 2: Front Buckle Connector With Torque Specifications
    G06725998Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals