LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> CX-7 s Touring, 2.3 3, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System >> DSC HU/Cm Removal/Installation >> DSC HU/CM Connector Removal Note

DSC HU/CM Connector Removal Note

  1. Pull the lock lever up in the direction of the arrow.
  2. Pull the connector toward the vehicle rear and remove it.
    Fig 1: Pulling Lock Lever Up
    G06725263Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals