LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> 6 s Touring Plus >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Trunk Lid Latch Switch Inspection

Trunk Lid Latch Switch Inspection

  1. Disconnect the negative battery cable.
  2. Remove the recess. (See RECESS REMOVAL/INSTALLATION .)
  3. Remove the trunk lid trim. (See TRUNK LID TRIM REMOVAL/INSTALLATION .)
  4. Remove the trunk lid latch and lock actuator. (See TRUNK LID LATCH AND RELEASE ACTUATOR REMOVAL/INSTALLATION .)
  5. Press the latch in using a flathead screwdriver to inspect the latch lever condition.
    Fig 1: Inspecting Trunk Lid Latch Lever Condition
    G06200938Courtesy of MAZDA MOTORS CORP.
  6. Verify that the continuity is as indicated in the table
    • If not as indicated in the table, replace the trunk lid latch and lock actuator.
    Fig 2: Trunk Lid Latch Switch Continuity Table
    G06200939Courtesy of MAZDA MOTORS CORP.
    Fig 3: Identifying Trunk Lid Latch Switch Connector And Circuit
    G06200940Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals