Condenser Removal/Installation

Disconnect the negative battery cable.
Remove the following parts:
1. High-mount brake light. See HIGH-MOUNT BRAKE LIGHT REMOVAL/INSTALLATION )
2. Rear seat cushion. See REAR SEAT CUSHION REMOVAL/INSTALLATION )
3. Rear side seat back. See REAR SIDE SEAT BACK REMOVAL/INSTALLATION .
4. C-pillar trim. See C-PILLAR TRIM REMOVAL/INSTALLATION .
5. Rear package trim. See REAR PACKAGE TRIM REMOVAL/INSTALLATION .
Remove in the order indicated in the table.

Fig 1: Identifying Condenser, Connector And Bolt
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.