LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> 6 s Touring Plus >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment System >> Accessory Socket Inspection >> Front

Accessory Socket Inspection: Front

  1. Disconnect the negative battery cable.
  2. Remove the following parts.
    1. Upper panel. See UPPER PANEL REMOVAL/INSTALLATION .
    2. Decoration panel. See DECORATION PANEL REMOVAL/INSTALLATION .
    3. Shift knob (MTX). See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .
    4. Shift panel. See SHIFT PANEL REMOVAL/INSTALLATION .
    5. Center panel lower. See CENTER PANEL LOWER REMOVAL/INSTALLATION .
    6. Accessory socket (Front). See ACCESSORY SOCKET REMOVAL/INSTALLATION .
  3. Connect a tester as shown in the figure and verify that there is continuity.
    • If the continuity cannot be verified, replace the accessory socket (Front).
      Fig 1: Connecting Tester
      G06201199Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals